• 201. 2nd Floor, Golden Square, B/s. Maruti Suzuki Showroom, Ankleshwar, Gujarat 393 001

G-CRANKZ EXTREME 4000 15W-40

Product Description

G-CRANKZ EXTREME 4000 15W-40 Oil is designed for regular operation in a wide variety of turbocharged and non-turbocharged ultra-low emission diesel engines. It contains high purity base oils and a carefully chosen mix of additives to defend against deposits, wear, and heat thickening. This oil make sure best engine performance and robustness of engine.

application
  • A diverse selection of turbocharged and non-turbocharged diesel engines that must fulfill API CH-4 performance and the Euro 4 emission standard.
  • It is suited to use in On-highway heavy-duty trucks, buses, and mixed fleets powered by diesel engines.
  • Agriculture, mining, construction, and quarrying vehicles are examples of off-highway uses.
  • It is best suited for vehicles manufactured by BHARAT BENZ, TATA, ASHOK LAYLEND, VOLVO, EICHER, MAHINDRA, etc
Key Performance Benefits
  • High acid neutralizing properties provide superior corrosion protection to extend overhaul intervals.
  • Control of high temperature deposit formation to reduce maintenance costs.
  • Protection against oil thickening to control filter pressure for long engine life.
  • Resistance to breakdown under different operation conditions to extend engine life.
  • Performance stability during the whole drain interval.
Performance standard
  • API CH-4
  • MAN M 3275-1
  • Cummins CES 20076
  • Volvo VDS-2,
Pack Size
0.5L
1L
5L
6L
7.5L
8.5L
10L
15L
17L
20L
26L
55L
205 L
typical characteristics
TYPICAL PROPERTIES ASTM METHOD TYPICAL VALUE
Appearance VISUAL Bright & Clear
Kinematic Viscosity @40℃, mm2/s, cSt ASTM D445 98.2
Kinematic Viscosity @100℃, mm2/s, cSt ASTM D445 14.3
Viscosity Index ASTM D2270 149
Low Temperature Cranking Viscosity @–20℃, cP ASTM D5293 6100
Flash Point (COC), ℃ ASTM D92 230
Pour Point, ℃ ASTM D97 -33
Total Base Number, mg KOH/g ISO 6619 10.5
Sulfated Ash, wt% ASTM D874 1.39
Density @29.5℃, kg/m3 ASTM D1298 0.862

Properties referred above are typical only and minor variations, which do not affect product performance, are expected to appear in standard manufacturing processes. Please follow equipment manufacturer's recommendations for performance level and viscosity grade.